Pilsan 05-113, Руководство по эксплуатации, Страница: 12 / 32

11 11
ASSEMBLY
MODE OF ASSEMBLY
Assembly of the product must be done by an adult.
1-) assembly of mirrors: place the mirrors numbered as 3 and 4 to the mirror socket numbered as 2 and which is located on the steering wheel system numbered as 1. (figure 1)
2-) connection of the steering wheel system with the body: place the headlights connection socket numbered as 5 and the throttle lever connection socket numbered as 6 which are
located on the steering wheel system numbered as 1, to their sockets located on the body numbered as 8 as shown in the (figure 2). position the steering wheel connection hole num-
bered as 7 located on the steering wheel system numbered as 1 and the body connection hole numbered as 9 located on the body numbered as 8, mount the washer numbered as 10
and mount the washer numbered as 11, the lock-washer numbered as 12 and the butterfly nut numbered as 13 to the washer end numbered as 10 which comes out at the bottom, fix
the washer numbered as 10 with a wrench, screw the butterfly nut numbered as 13 clockwise and finish the connection (figure 3).
3-) assembly of rear wheels: pass the spindle numbered as 15 through the spindle hole of the gearbox numbered as 14 located on the body numbered as 8 and center it. pass the drum
breaks numbered as 16 through the spindle numbered as 15 and place them on the gearbox numbered as 14. while mounting the rear wheel numbered as 17 to the spindle numbered
as 15, lock the wheel to the spindle numbered as 15 by pressing on the wheel connection button numbered as 18 located on the rear wheel numbered as 17. (figure 4) (do the same
process for the other wheel.)
4-) assembly of exhaust: while mounting the exhaust numbered as 19 to the body numbered as 8, remove the connection nut numbered as 22 located under the seat and push it by
pressing in a way that the exhaust connection socket numbered as 20 of the exhaust numbered as 19 places onto the exhaust connection nails numbered as 21 located on the body
numbered as 8 and make sure that the exhaust numbered as 19 is placed into its place. place the seat connection nut numbered as 22 to its place. (figure 5)
Note: Please make sure that the assembly is properly done before using the product.
STEERING WHEEL SYSTEM -1 PIECE
MIRROR SOCKET -2 PIECE
RIGT MIRROR -1 PIECE
LEFT MIRROR - 1 PIECE
HEADLIGHT CONNECTION SOCKET ( FEMALE – MALE) - 1 PIECE
THROTTLE LEVER CONNECTION SOCKET (FEMALE – MALE)-1 PIECE
STEERING WHEEL CONNECTION HOLE- 1 PIECE
BODY - 1 PIECE
BODY CONNECTION HOLE - 1 PIECE
SCREW -1 PIECE
WASHER -1 PIECE
LOCK-WASHER - 1 PIECE
BUTTERFLY NUT - 1 PIECE
GEARBOX (RIGHT AND LEFT) - 2 PIECES
SPINDLE - 1 PIECE
DRUM BREAK - 2 PIECES
REAR WHEEL - 2 PIECES
WHEEL CONNECTION BUTTON - 2 PIECES
EXHAUST - 1 PIECE
EXHAUST CONNECTION SOCKET - 1 PIECE
EXHAUST CONNECTION NAIL - 1 PIECE
SEAT CONNECTION NUT - 1 PIECE
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
14)
15)
16)
17)
18)
19)
20)
21)
22)
Figure 4
Figure 5
Figure 1
Figure 2
Figure 3