Pilote P740 Evidence, Руководство пользователя

Страница: 5 / 17

Rotary push button
The rotary push button (8) is used to select and
change set points and parameters; it is then
tapped to save the values. Selected menu items
flash.
Turn clockwise
!
The menu is scrolled
through from left to right
Turn counterclockwise
!
The menu is scrolled
through from right to left
Tap
!
Save a selected value
!
Select a menu item, go
Press (3 seconds)
!
Main switching function
- control panel on/off
1. Display
2. Status line
3. Menu line (top)
4. Menu line (bottom)
5. Power supply
display 120 VAC
(mains supply)
6. Time switch
display
7. Settings/values
8. Rotary push
button
9. Back button
Description
!
A rotary push button(8) is used to select
menu items in the menu lines (3 + 4) and to
adjust settings.
!
Information is shown on a backlit display
(1).
!
The Back button (9) is used to go back to a
previous menu.
Back button
Press the Back button (9) to go back to a previous
menu and cancel settings. This means that the
previous values remain unchanged.
Instructions for use
!
If there is an interruption to the power sup- ply, the clock has to be reset.
!
If a new furnace is connected to the bus sys- tem of the control panel, repeat the
proce dure described in "Initial start-up".
TRAUMA HEATING AND WATER INSTRUCTIONS