PILOTAGE NANO-X2, Руководство пользователя

Страница: 19 / 24

18
www.pilotage-rc.com
NOTE:
If the aircraft still keeps drifting to one direction, you can put it on a level surface .
Pad several pieces of paper on the deviating direction (The paper quantity re-
quired is dependent on the drifting extent in order to adjust the deviating angle
of the accelerometer) .
STUCK PROTECTION AND ACTIVATION
COMMON BREAKDOWN MAINTENANCE OF THE R/C
QUADROCOPTER
During the course of flying, in the case that it is collided or any other reason which cause jam to the propeller, the battery protecting
board of the aircraft will power off automatically so as not to cause damaged or danger . Under the condition that the battery
is fully charged, you can switch off the power and just restart it . If the aircraft is not connected with the power after being restarted,
it means the battery electricity is not enough to activate the battery . This time you can use the original USB charging wire made
in our factory to connect with the power and then simply activate it .
Troubleshooting Repair method
The main rotor won’t
be rotating/ deviate
when taking off
Reload the batteries inside the aircraft and make decoding once again . If this
problem still can not be solved, please check if the propeller or rotor is deformed
or not . if it is severely deformed, please replace it accordingly .
It can not take off
If there is insufficient power with the aircraft, please recharge it . If the problem still
can not be settled, please kindly calibrate it correctly by following the (accelerator
calibration) written in the instruction manual .
4 . Push the Ascending& Descending /steering rudder to the left up corner, push the throttle/aileron control lever to the left down corner, this
time the indicator of the aircraft will be flashing for 1–2 seconds, that represents the calibration is successfully finished (right-hand throttle) .