Pilot Communications DualCam CL-3016, Руководство пользователя

Страница: 6 / 16

PILOT.
DUAL CAJY\
GETTING STARTED
MOUNTING THE CAMERA
Please make sure that you are following the regulations and laws set by your country or
states DMV (Department of Motor Vehicles) prior to mounting your camera. This will
avoid any accidents and traffic violations that can occur if the camera is mounted in a
location that is prohibited by law.
NOTE: Pilot Automotive shall not be held responsible for any traffic violations related to
the positioning or improper use of our product.
Using the suction cup and rotating bracket, mount the DualCam to the inside of your
vehicles windshield (use the adjustment knob to loosen and tighten the camera as
needed).
NOTE: The DualCam can also be used to record both exterior and interior (front and
rear) of your vehicle. For interior recording, simply follow the steps above and rotate the
camera so that the lens is facing the inside of your vehicle.
INSERT THE SD CARD
Insert your micro SD card into the DualCam's micro SD slot. Make sure that you insert
the in the correct direction as shown. The SD card will make a clicking sound, indicating it
has been locked into the DualCam.
..
.
9
CONNECT THE POWER CABLE
1.
Connect the car charger cable into
the DualCam's power socket located
on the bottom side of the camera.
NOTE: Use the brackets adjustment
knob to make adjustments as needed.
2. Depending on where you've chosen
to mount the DualCam, run the
power cable around the trim of your
vehicle so that it will not obstruct
your view while driving.
3. Insert the car charger into your
vehicle's cigarette lighter port as
shown. A red light on the car charger
will light up, indicating it is connected.
10