8
30. Mount the aluminum plate to the bottom of
the fuselage with 3 screws. The bend in
the aluminum plate goes down.
(See photo)
31. Locate horizontal stabilizer and elevators
along with 6 CA hinges. Repeat the
assembly process similar to the ailerons.
Make sure to adjust the gaps in the hinge
line as well as the end gaps prior to
gluing.
32. Epoxy horizontal tail into position on the
fuselage making sure to center accurately.
33. Prepare the vertical fin and rudder for
installation. Install CA hinges in rudder
and fin.
34.
NOTE:
Tail wheel must be installed at the
same time as the rudder.
35. Epoxy vertical fin and rudder in place
along with the tailwheel steering arm.
(See photo)
36. Locate the Pull-Pull rudder control parts.
2 lengths of cable, 4 metal clevises and 4
metal crimp tubes.
