PIKA Harbor Flex SB10p, Руководство по эксплуатации

Страница: 9 / 27

7 Harbor Smart Battery Operation Manual M00017-02
Section 2: Safety instructions
Section 2: Safety instructions
IMPORTANT SAFETY INSTRUCTIONS. SAVE THESE INSTRUCTIONS!
General Warnings
SHOCK RISK: HIGH VOLTAGE ELECTRICITY
WARNING: To reduce the risk of injury, read all instructions and caution
markings before installing Harbor. Consult installation documentation for
all other REbus devices on the system.
WARNING: Harbor must be installed by trained and qualified technicians,
and in accordance with all instructions.
WARNING: Electrical installation in the United States shall be done in
accordance with all local electrical codes and/or the National Electrical
Code (NEC), ANSI/NFPA 70.
WARNING: Electrical installation in Canada shall be done in accordance
with all local electrical codes and/or the Canadian Electrical Code.
WARNING: Connecting the Pika Energy Island to the electric utility
grid must only be done after receiving prior approval from the utility
company and installation completed only by qualified personnel/licensed
electrician(s).
WARNING: This equipment is NOT intended for use with life support
equipment or other medical equipment or devices.
WARNING: Protection against lightning surges in accordance with local
electric codes are the responsibility of the installer.
WARNING: Connect only to REbus-compatible devices. Never connect to
any other power source, including raw PV output, AC power, or any non-
REbus compatible battery.
WARNING: TURN BATTERY DISCONNECT TO “OFF” TO PREVENT
TERMINALS FROM ENERGIZING.