pigtronix Echolution 2 Deluxe, Руководство пользователя

Страница: 14 / 21

p i g t r o n i x . c o m
| 27 26 |
p i g t r o n i x . c o m
E c h o l u t i o n 2 | E c h o l u t i o n 2 D e l u x e E c h o l u t i o n 2 | E c h o l u t i o n 2 D e l u x e
MIDI
Every function of the Echolution 2 can be controlled via MIDI.
SETTING THE E2 MIDI CHANNEL:
1. Power up the E2 while holding down the PRESET rotary switch.
2. After the firmware version number has been displayed, a ‘C’ will
appear. This indicates that the E2 will enter the MIDI Channel
Selection Menu upon release of the Preset rotary switch
3. Once in this menu, the user can see the current MIDI channel and
change it, if necessary, by turning the Preset Rotary Switch.
*Possible MIDI Channels are 1-16, with tens indicated by an
illuminated decimal point, to the lower right of the number.
i.e. 9 = 9, 0. = 10, 1. = 11
4. To select a channel,
PRESS
the Preset rotary switch. The E2 will
continue its boot process.
SUPPORTED MIDI COMMANDS
To load a particular preset, simply send a program change command with the desired
preset number. The E2 will load that number plus one as the preset. This is because
many MIDI controllers send “
PROGRAM CHANGE
x-1” when you select
program x. ie. The foot controller will send “ PROGRAM CHANGE 00 ”
when you select the footswitch corresponding to preset 1. If you want preset 00, send
127 as the program.
MIDI
MIDI CLOCK OPTIONS
Non-pitched MIDI Tracking: Taps teleport when a new MIDI Tempo is received. The
new MIDI clock will only jump if the change in tempo is greater than 10 ms. This can
be switched on and off during the boot-up process by holding the Delay Time button.
Enable MIDI Clock In: This allows the E2 to adjust its delay time in accordance with a
MIDI clock connected to the MIDI IN port. By switching this off, the E2 will ignore the
MIDI clock received in the input and replaces it with its own clock. To toggle the Enable
MIDI Clock setting, press and hold EXP button during power up.
Note: When MIDI Synced, tapping a new delay length will quantize the new length to
an integer number of MIDI quarter notes. (i.e. you can change the delay time while
remaining MIDI Synced). To get back to the original delay time, double tap the Tap
Tempo switch.
Enable MIDI Clock Out: This allows the E2 to output its own MIDI clock taken from its
Delay Time knob and pass it out of its MIDI OUT port. To toggle the Enable MIDI Clock
Out setting, press and hold Special Functions button during power up.
Copy MIDI Clock: This passes the MIDI Clock In, to the MIDI Clock Out. Even if the E2 is
ignoring the MIDI Clock In and operating on its own delay time, it will still output the
MIDI Clock In. This allows the user to control multiple E2’s via MIDI CC’s with different
delay lengths. To toggle the Copy MIDI Clock setting, press and hold Special Effects
button during power up.