background image

11

10

Removing & emptying the dust canister

Checking for blockages

Ensure the vac is switched off before emptying the dust canister.

Using the attachments

When changing the attachments ensure the upright vac is switched off.

3-IN-1 CREVICE TOOL ACCESSORY

•   The 3-in-1 crevice tool with brush 

allows for vacuuming in narrow and 

hard-to-reach places. 

•   Push the locking tab in to remove the 

brush accessory. 

•   Use the soft bristles for dusting 

surfaces, and reverse the attachment 

to use as an upholstery tool.

•   Remove the hose handle from the 

machine. Always ensure the vacuum  

is in upright (parked position) when 

using the hose.

•   The rotating brush is lifted clear of  

the floor surface while the vacuum is 

parked upright. To prevent possible 

flooring damage, do not tilt the  

vacuum forwards or sideways while 

using the hose.

•   For stairs, position the cleaner with  

the rear wheels against the stair  

tread (vacuum cleaner facing away  

from the stairs), and use the 

attachments to clean each step.

 The hose is ready to use alone, or fit  

the 3-in-1 crevice tool to suit the  

cleaning task.

•   Inspect the lower tube and nozzle and remove  

any dirt and debris.

•   The lower hose can be removed from the nozzle.
•   Remove the main hose by rotating the connector  

to unlock, and check for blockages in the hose and elbow connector.

•   Remove the dust canister, and follow the steps on the next page for cleaning.

1

2

Press dust canister release 

button to remove the 

dust canister.

Hold dust canister over 

rubbish bin and unclip  

the lock on the bottom  

of the canister, allowing 

the dust to empty.

Close the base of the dust 

canister, align the canister 

base back  

onto the machine and 

push until it clicks back 

into place.

WARNING:

 If the filter or hose is clogged, the motor may shut down in order to 

protect itself from overheating. If this occurs, unplug the vacuum, clean the filter 

and inspect the hoses and canister for clogging. Allow 1 hour for the unit to fully 

cool down before resuming use.

1

2

3

Содержание PUV011












Отзывы: