PIEROBON TD 21 Series, Руководство оператора и запасные части

Страница: 29 / 82

28
2) Cleaning seeds and fertilizer boxes:
3) Lubrication chart:
At the end of the seeding season and with the machine
still on the field, seed and fertilizer boxes should be
cleaned following these steps:
• Open discharge outlets and drop all seeds and fertilizer
to ground.
• Sweep remaining seed and fertilizer towards discharge
outlets.
• Make drive wheel turn to remove all the seeds and
fertilizer housed in meters.
• Check that there are no remaining seeds or fertilizer in
boxes,meters and discharge tubes.Then proceed to block
all discharge outlets in the boxes.
To avoid metal getting rusty and
meters getting clogged, remove
seeds (especially if they have been
chemically treated) and fertilizer
completely before storing
the machine.
Understand all procedures before doing maintenance jobs.
Never lubricate, adjust or repair machine while it is in motion.
Keep hands, feet and clothing away from moving parts.
1 x wheel Drive wheel shaft tube 50 42-A
1 x wheel Drive wheel pressure rod 30 43-A
1 x row marker Base bushings in markers cylinders 30 44-A
1 x row marker Bushings in markers support pin 30 44-B
2 x wheel Transport and work wheels pivot 30 45-A
1 x wheel Bushings for wheels vertical locking pins 150 45-B
2 x hitch Work hitch hinge pin (TD30) 100 46-A
4 x hitch Bushings in transport hitch hinge 100 47-A
2 x cylinder Bushings in hydraulic rocking system cylinder 50 48-A
1 x machine Joints at modules linkages – lateral tandem 150 49-A
1 x machine Joint and hinge pin in module linkages – lateral tandem 150 50-A
1 x row unit Gauge wheels arms end – rocker 35 51-A
2 x row unit Bushings in gauge wheels arms 25 51-B
4 x arm Parallel arm shaft - wheel support 30 52-A
2 x arm Cylinder axles – wheels support 30 52-B
1 x drive Bushing in square center drive shaft - lucerne box 50 53-A
2 x box Lucerne box drive shaft 50 54-A
WARNING
WARNING
NUMBER OF
GREASE FITTINGS
LOCATION
LUBRICATION INTERVAL
(EXPRESSED IN HOURS)
PICTURE