PIEROBON TD 21 Series, Руководство оператора и запасные части

Страница: 26 / 82

25
P) Safety “r” clips position in wheels locks
Keeping wheels locked either in working or transport
position, with locks rods in their housing (fork bottom), “R”
clip should be placed at lower part as a safety device
(Picture 33).
In wheels that remain unlocked in transport position, “R”
clip will be placed at upper part of the rod
(Picture 34).
In this way, the ball found at the rod end will perform as a
stop onto the conical housing placed at the fork bottom.
Because of the effect of the inner spring, if the wheel
turns, it will get unlocked and then locked again automati-
cally to avoid a sudden zigzag of the wheel.
Q) End-wise transport hitch
End-wise transport is carried out by means of a hitch
(Picture 35)
located on one of the sides, by using the same
wheels as in working position since they are self-oriented.
This hitch is easily folded when the machine changes into
working position
(Picture 36).
Picture
33
Picture 34
Picture
35
Picture 36
CAUTION CAUTION
DRIVE WHEEL TIRE INFLATION
PRESSURE
Minimum: 48 lbs/inches 2
Maximum: 58 lbs/inches 2
Minimum: 45 lbs/inches 2
Maximum: 52 lbs/inches
2
INFLATION PRESSURE
FOR 11L15/400-60X15,5
TIRES