Wireless / USB Powered -
The device can be programmed for your 802.11n
(2.4ghz only) Wireless network using WPA2 / PSK
and will operate remotely via the included 5V USB
Adapter. SenseiAQ Software is used to initially
provision the Wifi network settings.
Wireless / PoE Powered -
The device can be programmed for Wifi and still
receive power via the PoE Ethernet Port or injector;
however the Ethernet “Link” will remain down while
operating in this mode
Power Failover
The onboard circuitry supports failover between PoE+ power and USB Power
automatically. PoE+ will be used when available during power-on.
Notes on External Antenna for 2.4g Wifi Specifications
Canāree i1 supports external Wifi antennas for the 2.4Ghz Band using a single stream
RP-SMA connector. The factory antenna is unidirectional and operates at +4dbM. and
can operate up to 400’ from a Wireless AP in most circumstances. 3rd party antennas
can extend range and coverage beyond this point and improve connectivity in poor Wifi
coverage areas. For more information on supported antennas contact
PieraSystems.com/support
Piera Systems Inc. reserves the right to make corrections, modifications enhancements, improvements and other changes to its products and
services at any time and to discontinue any product or service without notice. Please contact Piera Systems anytime to obtain the latest relevant
information - We are ready to help you determine which of our solutions will best meet your needs contact
for information.
© 2021 Piera Systems Inc.
Page | 3
