11
4. Install/Remove the Battery
5. MiniSD Memory Card
• Important data should always be
saved on the computer. The company
will not take any responsibility for the
loss of data on this product.
• If the memory card cannot be
removed easily, instead of removing it
with force, inquire to the service center
for its removal, or ask for an exchange
or refund of the product.
[Install the Battery]
[Remove the Battery]
1. Put the battery in line with
the left part of the PDA
and then push the right part to
lock.
2. Put the projected part of the
cover on top of the groove in
the back and then push
carefully with both thumbs.
1. Push down using both thumbs
to remove the cover.
2. Raise the battery by using the
groove on the lower part to remove
the battery.
II. Understanding
Your Phone
• Frequent insertion/removal of
the memory card, or applying
too much force to it, may cause
the product to malfunction.
• Card removal and turning the
power off/on using the memory
card may result in loss of data
or cause the memory card and
PDA to malfunction.
Make sure that the gold plate terminal of the memory card is pointed
towards the back when inserting into the MiniSD slot. For removal
push the exposed part of the memory card. It will pop out.
We strongly recommend that you use the adapter which was purchased with the product for charging the battery. However, the 24 pin charger of an ordinary
mobile phone may also be used to charge the PDA battery. (Due to the characteristics of a standard charger, there may be small discharge of electricity
despite the charger being fully charged.)
