13
Coating System Assembly
>The Pump
STEP 1
STEP 2
STEP 3
Cut the Resin Pump Supply Hose in between 248mm to 254mm (9.¾
”
to
10”).
Ensure
the ends are squared.
Prepare the Hose Connectors and Hose Clamps to be inserted into Resin Supply
Hose. There are 2 small hose clamps for black hose (10mm) and 2 larger hose clamps
for red hose (13mm).
Insert hose connectors and rotate notched surface up while following the natural curve
of the hose. Ensure hose clamps are facing outward and inward. Once positioned
properly tighten the hose clamps. This is important when installing into the pump
housing.
248mm to 254mm /
9.¾
”
to
10”
