Picote Solutions Oy Ltd
13
www.picoteinstitute.com
1.
Before performing any maintenance always check that the machine is
fully turned off and the foot pedal is
removed.
2.
Clean the belt and upper roller when it becomes dirty. Sand or other objects that can damage the belt should be
removed as soon as possible (weekly check).
3.
Check operation of hinges (weekly check)
4.
Check that all the bolts and screws on the machine are securely tightened (except for the belt tightening screws.
See page 14).
TIGHTENING THE HINGES
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
MAINTENANCE
10
CLEANING THE MACHINE
Do not run the machine while cleaning the belt!
To clean the belt completely, the machine needs to be turned
on
-
move the belt to a new position and
turn off
the machine again before cleaning.
Do not pour or spray water on the machine!
Use a damp cloth to clean the surfaces.
The machine uses hinges with brakes to prevent the upper roller assembly from injuring the user. After some time
the hinges will become looser and the operator will need to tighten them. Correct tightness is when the roller
assembly can
’
t fold down unless done so by the operator.
