PICO PicoScope 3204 MSO Скачать руководство пользователя страница 129

Страница: 129 / 144

PicoScope 3000A Series Prog rammer's Guide

123

ps3000abpg.en r9

PICO_CONFIG_FAIL_AWG

Unable to configure the signal generator

PICO_INITIALISE_FPGA

The FPGA cannot be initialized, so unit cannot be opened

PICO_EXTERNAL_FREQUENCY_INVALID

The frequency for the external clock is not within ±5% of the stated value

PICO_CLOCK_CHANGE_ERROR

The FPGA could not lock the clock signal

PICO_TRIGGER_AND_EXTERNAL_CLOCK_CLASH

You are trying to configure the AUX input as both a trigger and a reference
clock

PICO_PWQ_AND_EXTERNAL_CLOCK_CLASH

You are trying to congfigure the AUX input as both a pulse width qualifier and
a reference clock

PICO_UNABLE_TO_OPEN_SCALING_FILE

The scaling file set can not be opened.

PICO_MEMORY_CLOCK_FREQUENCY

The frequency of the memory is reporting incorrectly.

PICO_I2C_NOT_RESPONDING

The I2C that is being actioned is not responding to requests.

PICO_NO_CAPTURES_AVAILABLE

There are no captures available and therefore no data can be returned.

PICO_NOT_USED_IN_THIS_CAPTURE_MODE

The capture mode the device is currently running in does not support the
current request.

103

PICO_GET_DATA_ACTIVE

Reserved

104

PICO_IP_NETWORKED

The device is currently connected via the IP Network socket and thus the call
made is not supported.

105

PICO_INVALID_IP_ADDRESS

An IP address that is not correct has been passed to the driver.

106

PICO_IPSOCKET_FAILED

The IP socket has failed.

107

PICO_IPSOCKET_TIMEDOUT

The IP socket has timed out.

108

PICO_SETTINGS_FAILED

The settings requested have failed to be set.

109

PICO_NETWORK_FAILED

The network connection has failed.

10A

PICO_WS2_32_DLL_NOT_LOADED

Unable to load the WS2 dll.

10B

PICO_INVALID_IP_PORT

The IP port is invalid

10C

PICO_COUPLING_NOT_SUPPORTED

The type of coupling requested is not supported on the opened device.

10D

PICO_BANDWIDTH_NOT_SUPPORTED

Bandwidth limit is not supported on the opened device.

10E

PICO_INVALID_BANDWIDTH

The value requested for the bandwidth limit is out of range.

10F

PICO_AWG_NOT_SUPPORTED

The arbitrary waveform generator is not supported by the opened device.

110

PICO_ETS_NOT_RUNNING

Содержание PicoScope 3204 MSO













































































































































Результаты поиска

Содержание PicoScope 3204 MSO

Отзывы:

PICO PicoScope 3204 MSO, Руководство программиста, Страница: 129 / 144

Результаты поиска

Содержание PicoScope 3204 MSO

Отзывы: