PicoScope 3000D Series Oscilloscope & MSO User's Guide
7
Copyright © 2012–2015 Pico Technology Limited. All rights reserved.
ps3000d.en r2
1.1.5
Environment
WARNING
To prevent injury or death, do not use in wet or damp conditions, or near
explosive gas or vapor.
CAUTION
To prevent damage, always use and store your oscilloscope in appropriate
environments. Recommended temperatures and humidity conditions are
shown in the table below.
PicoScope 3000D Series
Storage
Operating
Temperature
–20 °C to +60 °C
0 °C to +40 °C
+15 °C to +30 °C
(for quoted accuracy)
Humidity
5% to 95% RH
(non-condensing)
5% to 80% RH
(non-condensing)
Altitude
2000 m
Pollution degree
2
1.1.6
Care of the instrument
The oscilloscope and its accessories contain no user-serviceable parts. Repair,
servicing, and calibration require specialized test equipment and must only be
performed by Pico Technology or an approved service provider. There may be a charge
for these services unless covered by the Pico five year warranty.
WARNING
To prevent injury or death, do not use the instrument if it appears to be
damaged in any way, and stop use immediately if you are concerned by any
abnormal operations.
WARNING
To prevent electric shock, do not tamper with or disassemble the
oscilloscope, case parts, connectors, or accessories.
WARNING
When cleaning the oscilloscope, use a soft cloth and a solution of mild soap
or detergent in water. To prevent electric shock, do not allow liquids to enter
the casing, as this will cause damage to the electronics or insulation inside.
CAUTION
Do not tamper with or disassemble the oscilloscope, connectors or
accessories. Internal damage will affect performance.
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
