Page 1.2
ULTRA HIGH DENSITY MATRIX MODULE 40-535/536/537
pickering
SECTION 1 - TECHNICAL SPECIFICATION
Ultra High Density Matrix – 40-535/536/537
pickering
test
.com
Specifications
Switching Specification
Switch Type:
Ruthenium Reed
Max Switch Voltage:
150VDC/100VAC*
Max Power:
Max Switch Current:
Max Carry Current:
10W
0.5A
0.5A
Initial Path Resistance
On (Single Module):
Off (Single Module):
Thermal Offset:
<1000mΩ
>10
9
Ω
<5µV
Operate Time:
Release Time:
<1ms, 0.5ms typical
<1ms, 0.5ms typical
Expected Life
Low power load:
Full power load:
1x10
9
operations
>5x10
6
operations
* For full voltage rating, signal sources to be switched must be fully
isolated from mains supply and safety earth.
Power Requirements
+3.3V
+5V
+12V
-12V
0
800mA (typ 280mA)
0
0
Operating/Storage Conditions
Operating Conditions
Operating Temperature:
Humidity:
Altitude:
Up to 90% non-condensing
5000m
Storage and Transport Conditions
Storage Temperature:
Humidity:
Altitude:
-20°C to +75°C
Up to 90% non-condensing
15000m
PXI & CompactPCI Compliance
The module is compliant with the PXI Specification 2.2. Local Bus,
Trigger Bus and Star Trigger are not implemented.
Uses a 33MHz 32-bit backplane interface.
Safety & CE Compliance
All modules are fully CE compliant and meet applicable EU
directives: Low-voltage safety EN61010-1:2010, EMC Immunity
EN61326-1:2013, Emissions EN55011:2009+A1:2010.
Mechanical Characteristics
Single slot 3U PXI (CompactPCI card).
Module weight: 380g (40-536-021).
3D models for all versions in a variety of popular file formats are
available on request.
Connectors
PXI bus via 32-bit P1/J1 backplane connector.
Signals via front panel 96-pin male micro-D connector, for pin outs
please refer to the operating manual.
Relay Type
The 40-535/536/537 modules are fitted with ruthenium sputtered
reed relays, these offer very long life with good low level switching
performance and excellent contact resistance stability. Spare reed
telays are built onto the circuit board to allow easy maintenance
with minimum downtime.
All reed relays are manufactured by our sister company Pickering
Electronics:
pickeringrelay.com
Internal Construction of the 92x4 Ultra High Density Matrix Module
