Pichler 60417300, Руководство пользователя

Страница: 12 / 14

Page 12 of 14
Using compressed air or a vacuum cleaner remove any deposits.
Visually check (e.g. with a videoscope) the cleaned glow plug
hole for cleansiness and if necessary repeat the cleaning
process from 2.4.
2.7. Carefully, with minimal pressure rotate clockwise only and clean the
sealing cone from carbon deposits
If space is limited can the actuator be extended with an extension and a socket 10.
3. Cleaning and checking
After completion of the cleaning, remove the actuator from the
reamer and unscrew the guide with a socket and carefully pull the
shouldered reamer out of the hole.
Rotate clockwise only and
apply only minimal pressure!
Cross section of the cylinder head
Cross section of the cylinder head