PIAGGIO X8 125, Руководство пользователя

Страница: 63 / 88

03_32
N.B.
THE ABOVE PROCEDURE COMPLIES WITH THE EUROPEAN STANDARDS RE-
GARDING MAXIMUM AND MINIMUM HEIGHT OF LIGHT BEAMS. REFER TO THE
STATUTORY REGULATIONS IN FORCE IN EVERY COUNTRY WHERE THE VE-
HICLE IS USED.
03_33
03_34
Frontdirectionindicators (03_33, 03_34, 03_35)
To replace a burst bulb:
1. Remove the driving mirrors, by lifting the cover and loosening the two screws " A "
on both sides.
2. Remove the front turn indicator light assembly cover, by loosening the four fixing
screws " B ".
3. By loosening the two fixing screws " C " remove the turn indicator light;
To reassemble, repeat the operation in the reverse order.
WARNING
HIGH- AND LOW-BEAM BULBS ARE HALOGEN TYPE: DO NOT TOUCH THEM
WITH YOUR FINGERS TO AVOID DAMAGING THEIR FUNCTION.
63
3 Maintenance