PIAGGIO LUM Beverly Sport Touring 350 ie Скачать руководство пользователя страница 92 | Manualshive

Страница: 92 / 92

PIAGGIO LUM Beverly Sport Touring 350 ie Скачать руководство пользователя страница 92

The descriptions and images in this publication are given for illustrative purposes only and are not binding. While the basic characteristics as described and illustrated in this booklet remain unchanged,

Piaggio & C. S.p.A. reserves the right, at any time and without being required to update this publication beforehand, to make any changes to components, parts or accessories, which it considers

necessary to improve the product or which are required for manufacturing or construction reasons.

Not all versions/models shown in this publication are available in all countries. The availability of each model should be checked at the official PIAGGIO sales network.

© Copyright 2013 - Piaggio & C. S.p.A. All rights reserved. Reproduction of this publication in whole or in part is prohibited.

Piaggio & C. S.p.A. Viale Rinaldo Piaggio, 25 - 56025 PONTEDERA (PI), Italy

www.piaggio.com

«
...
90
91
92

Содержание LUM Beverly Sport Touring 350 ie





























































































Отзывы:

Нет отзывов