PIAGGIO LUM Beverly Sport Touring 350 ie Скачать руководство пользователя страница 18

Страница: 18 / 92

01_18

01_19

Together with the two keys, you will be given a CODE CARD bearing the same code
imprinted onto the two keys.

WARNING

LOSING THE MASTER KEY PREVENTS ANY FURTHER REPAIR OF THE "PIAG-
GIO IMMOBILISER" SYSTEM AND OF THE ENGINE CONTROL UNIT.

WARNING

KEEP THE "CODE CARD" AND THE MASTER KEY IN A SAFE PLACE (NOT IN
THE VEHICLE).

01_20

Immobilizer device enabled indicator led (01_20)

The activation of the «

PIAGGIO IMMOBILISER»

system is signalled by the a flashing

indicator «

».

In order to reduce battery discharge, the indicator LED turns off automatically after 48
hours of uninterrupted functioning.

Should the system fail, different LED flashing patterns will provide the

Authorised

Service Centre

with information on the type of fault detected.

1 Vehicle

Содержание LUM Beverly Sport Touring 350 ie





























































































Результаты поиска

Содержание LUM Beverly Sport Touring 350 ie

Отзывы:

PIAGGIO LUM Beverly Sport Touring 350 ie, Руководство пользователя, Страница: 18 / 92

Результаты поиска

Содержание LUM Beverly Sport Touring 350 ie

Отзывы: