
Engine oil top-up
Always check oil level before topping-up and add oil
without exceeding the MAX
level
. Getting an oil level between the
MIN
and
MAX
levels requires ~ 200 cm³ of oil.
Take your vehicle to an
Authorised Service Centre
to have the engine oil checked
and if necessary, topped-up as indicated in the scheduled maintenance table.
03_03
Warning light (insufficient oil pressure) (03_03)
The scooter is equipped with a warning light «
H
» that lights up when the key is turned
to «
ON
».
However, this light should switch off once the engine has been started.
If the light comes on during braking, at idling speed or while turning a corner,
it is necessary to check the oil level and top-up if required. If after having topped
up the oil, the warning light still turns on while braking, at idle speed or while
turning a corner, it will be necessary to turn to an Authorised Service Centre.
03_04
Engine oil change (03_04)
The oil and the cartridge filter «
C
» must be changed as indicated in the scheduled
maintenance table at an
Authorised Service Centre
. The engine should be emptied
by draining the oil from the drainage plug «
B
» of the gauze filter on the flywheel side.
In order to facilitate the oil drainage, loosen the cap/dipstick. Since a certain quantity
of oil still remains in the circuit, filling must be done with approx. 600 ÷ 650 cm³ of oil
through the cap «
A
». Then start up the scooter, leave it running for a few minutes and
switch it off: after five minutes, check the level and if necessary top-up
without ex-
ceeding the MAX. level
. The cartridge filter must be replaced at every oil change.
For top-ups and changes, use new oil of the recommended type.
41
3 Maintenance
Содержание Beverly Tourer 250 i.e.
