manualshive.com logo in svg

PIAGGIO Beverly Tourer 250 i.e., Руководство пользователя

Поделиться
Скачать
PIAGGIO Beverly Tourer 250 i.e. Скачать руководство пользователя страница 18

thorised Service Centre

. The codes of keys not submitted for the new storage

procedure are deleted from the memory. Any lost keys will therefore not be enabled
to start the engine.

WARNING

EACH KEY HAS ITS OWN AND UNIQUE CODE, WHICH MUST BE STORED BY
THE SYSTEM CONTROL UNIT.

VIOLENT SHOCKS MAY AFFECT THE ELECTRONIC COMPONENTS OF THE
KEY.

IF OWNERSHIP OF THE VEHICLE IS TRANSFERRED, THE RED-HANDGRIP KEY
(AS WELL AS THE OTHER KEYS) AND THE "CODE CARD" MUST ALSO BE
TRANSFERRED TO THE NEW OWNER.

Programming the immobilizer system

The procedure for programming the «

PIAGGIO IMMOBILIZER

» system and/or for

storing other key codes is described below.

The programming procedure should be carried out with the engine stop switch set to
«

RUN

».

Procedure start - red key

Insert the red-handgrip key in the switch key (in "

OFF

" position) and turn it to "

ON

".

After 1 - 3 seconds, turn the key to "

OFF

" again and pull it out.

18

1 Vehicle

Содержание Beverly Tourer 250 i.e.





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды