PIAGGIO Beverly 400 I.E, Руководство пользователя

Страница: 54 / 82

03_26
03_27
03_28
Front light group (03_26, 03_27, 03_28, 03_29, 03_30, 03_31,
03_32)
To remove the front headlight assembly, proceed as follows:
1 . Remove screws « A » of the brake fluid reservoir caps.
2 . Remove the windshield by undoing the three screws « B ».
3 . Remove the rear-view mirrors.
4 . Remove the screws « C » of the upper coupling.
5 . Remove the screws « D » of the lower coupling.
6. Remove the two screws « E » of the rear handlebar cover.
7 . Detach the front handlebar cover.
This gives access to the bulbs.
Release the clip and take out the bulb of the high-beam/low-beam headlamp « F ».
To replace the tail light « G », take out the rubber bulb holder from its fitting.
To reassemble, repeat the operation but in reverse order.
WARNING
THE TWIN-FILAMENT (HIGH-BEAM AND LOW-BEAM) BULB IS HALOGEN: DO
NOT TOUCH THE BULB WITH YOUR FINGERS TO AVOID COMPROMISING ITS
FUNCTIONING
Headlight adjustment (03_33, 03_34)
Proceed as follows:
1 . Place the vehicle in running order and with the tyres inflated to the prescribed pres-
sure, on a flat surface 10 m away from a white screen situated in a shaded area,
making sure that the longitudinal axis of the vehicle is perpendicular to the screen;
54
3 Maintenance