Piaget 500P1, Инструкция по эксплуатации

Страница: 6 / 25

9 8
WINDING THE MOVEMENT
Self-winding watches are wound by the movement of the wrist when the watch is worn.
If the watch has not been worn for around 40 hours, wind it by hand with the crown in
position 0, that is, turn the crown in the clockwise direction (around 10 turns of the crown
are sufficient to restart the mechanism).
SETTING THE TIME
The mechanism is equipped with a balance-stopping device. Pulling the crown to
position 2 will stop the movement. Pull the crown out to position 2 then turn it clockwise
or anti clockwise to position the hands. Push the crown back to position 0 after the
adjustment.
SETTING THE DATE
Pull the crown out to position 1 then turn it clockwise to select the desired date. Since
the date change occurs at midnight, make sure you distinguish midnight from noon when
proceeding to the adjustment. In order to avoid damaging the mechanism, we advise you
not to adjust the date between 9 p.m and 3 a.m. Push the crown back to position 0 after
the adjustment.
ADJUSTING THE FUNCTIONS
500P1
SELF-WINDING MECHANICAL MOVEMENT, DATE, SECONDS
ENGLISH
A N T I C L O C K W I S E
C L O C K W I S E
0 - 1 - 2
28
DAT E