-3-
PKI-0072-4
●
Verify all the parts are included. If a part is missing, please contact the place of purchase or PIAA directly.
●
Depending on mounting methods, some parts may not be used.
Product Details
Mounting Hardware
Two
8
mm allen
head bolts
Two 8mm
Lock Washer
Four 8mm
Lock Nuts
●
Before connecting PIAA Lamp relay harness to the battery, verify the wiring arrangement.
●
When connecting the battery terminal and or other electrical units, do not mistake the (-) and (+) terminals. Always start
with the (+) terminal.
●
After all wiring is complete, confi rm that it works properly. If it fails to activate, refer to“8 Troubleshooting”section of this manual.
One side
mou
n
ting bracket(R)
One Relay harness
As for S-RF50
(DKSR509),
due to the high
operation wattage,
an additional fuse
unit is added to the
lamp wire harness.
One S-RF Lamp
S-RF6
S-RF9
S-RF20
S-RF30
S-RF40
S-RF50
Four 8mm Socket
head bolts
Two 6mm Socket
head bolts
Two 6mm
Lock Nuts
Two bottom
mounting brackets
Two Rubber Parts
Two Protection
spacers
●
This product package contains one of the following lamp units
"S-RF6", "S-RF9" , "S-RF20" , "S-RF30" , "S-RF40" or "S-RF50".
●
S-RF50 relay harness is not compatible with S-RF6, S-RF9, S-RF20,
S-RF30, and S-RF40 lamp kit relay harness.
S-RF50 lamp and relay harness has a diff erent connector.
Installation procedure or S-RF50 relay harness is the same.
One side
mounting bracket(L)
