background image

PIaa CorPoratIon, Usa

3004 NE 181st Avenue

Portland, Oregon 97230

Telephone: 503.489.6666

Fax: 503.489.6600

Web: www.piaa.com

PIaa lIMIteD Warranty

With the exception of bulbs, PIAA Corporation, USA (“PIAA”) warrants its products to be free 

from defects in workmanship and materials under normal use for as long as the original 

purchaser owns them.

eXClUsIons

This Limited Warranty specifically excludes defects resulting from misuse, abuse, neglect, 

alteration, modification, improper installation, unauthorized repairs, submersion, theft, 

vehicle crash, or by any other type of impact.  Except for the Limited Warranty stated above, 

there are no warranties of PIAA products or any part thereof, whether express or implied.  

Any implied warranty of merchantability or any warranty of fitness for a particular purpose 

is expressly disclaimed.  Some states do not permit the disclaimer of implied warranties.

lens CraCKs

Crash or impact damage is not covered.  This can be determined by a chip or scrape on the 

lens or the housing.  Stress cracks sometimes occur when the lens is subjected to sudden 

and extreme temperature changes.  A stress crack has no chip or other sign of impact.  

Stress cracks are covered under warranty.

eXClUsIon oF DaMaGes

In no event shall PIAA be liable for any damages whatsoever (including, without limitation, 

consequential damages, incidental damages, or damages for loss of use, loss of business 

profits, business interruption, loss of business information, loss of time, inconvenience, or 

other losses) arising out of the use, misuse, or inability to use a PIAA product.  PIAA reserves 

the right to change the design of its products without any obligation to modify any previ-

ous product. This warranty gives you specific legal rights.  You may also have other rights 

that vary from state to state.

rePaIr anD rePlaCeMent

If a PIAA product is suspected of being defective, it must be submitted freight prepaid, to 

either an authorized dealer or distributor for warranty inspection.  The receipt or other proof 

of purchase and a description of the problem must be included.  The returned product will 

be inspected.  If the product is found to be defective and covered by this Limited War-

ranty, the sole remedy is repair or replacement, at PIAA’s option.  A repaired or replaced 

product will be shipped back at no charge, and will be warranted to be free from defects in 

workmanship and materials under normal use for as long as the original purchaser owns it.  

Removal, installation, or reinstallation costs are not covered by this Limited Warranty.

Содержание RS400













Отзывы: