-3-
PKI-0037-4
③ Switch
(1 pc)
※ Please use the tools indicated below.
● Phillips head driver
※ Verify all the parts are included. If a part is missing, please contact your local distributor.
Product Details
● Pliers
Tools Required
① Lamp main unit (2 units)
⑤ One-touch connector
(1 pc)
⑥ Wire tie (5 pcs)
④ Hexagonal wrench
(1 pc)
● 19mm wrench
⑦ Double-stick tape
for switch (1 pc)
● Do not use an Impact wrench when mounting the lamp.
● Over torqueing the mounting nut on the base could cause
base failure and void the warranty.
● You must utilize the washer, lock washer, and rubber base.
● Torque specifi cations on the base mounting nut is 20ft/lbs (27N/m)
Impact wrench
20ft/lbs (27N/m)
⑧ Rubber cap
(2 pcs)
⑨ Dummy connector
(1 pc)
② Pre-assembled relay harness
with fuse【LR-39】（1 set）
