PI Pimag V-417.216211E1, Руководство пользователя

Страница: 23 / 38

9 Troubleshooting
The positioner does not move, no operating noise can be heard
There is a motion error. ►
Reset the motion error.
Defective electronics ►
Check the electronics.
Electronics not connected correctly ►
Check all connecting cables (p. 19) .
Reduced positioning accuracy
Warped base body ►
Mount the V-417.216211E1 onto an even sur-
face (p. 12) .
Uncontrolled oscillation
Large changes to the load or the alignment
of the V-417.216211E1 ►
Switch off the servo control system or the con-
troller immediately.
►
Check whether the servo control parameter set-
tings correspond to the selected closed-loop
control mode; see user manual for the controller.
►
If necessary, correct the settings of the servo
control parameters.
Increased wear
Traveling to the hard stop with maximum
force ►
Ensure that the end of the travel range is ap-
proached at low velocity and with low force.
9 TROUBLESHOOTING V417M0003EN
‒
11/19/2018
23
M O T I O N | P O S I T I O N I N G