PI PIFOC P-725 series, Руководство пользователя

Страница: 11 / 25

Page 11 / 25
2018-11-13
P725T0010, valid for P-725
Physik Instrumente (PI ) GmbH & Co. KG, Auf der Roemerstr. 1, 76228 Karlsruhe/Germany
Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws, www.pi.ws
Installing the P-725 using the QuickLock thread adapter

Install the P-725 as described in the P721T0002 technical note for PIFOC QuickLock thread
option (p. 7).
Installing the P-725 Using the Mounting Holes (Optional)
The figure serves as an example and can differ from your model.
Figure 3: P-725 (example view): Mounting holes (black arrows) and locating holes (hatched arrows) in the base
body of the P-725
Requirements

You have read and understood the safety precautions (p. 3).
Tools and accessories

P721T0002 technical note for PIFOC QuickLock thread option (p. 7)

QuickLock thread adapter (p. 8) (not included)
Note that you only need the objective insert of the QuickLock thread adapter.

Four M2.5 screws of suitable length (p. 19) for screwing the P-725 onto a microscope

Optional: Two suitable locating pins (p. 19) for alignment of the P-725

Suitable tools
Installing the P-725 using the mounting holes (optional)
1. Screw the objective insert into the P-725 as described in the P721T0002 technical note for
PIFOC QuickLock thread option (p. 7).
2. Optional: Align the P-725 with the microscope using suitable locating pins and the locating
holes in the base body of the P-725 (see Figure 3 above).
3. Affix the P-725 to the microscope using four suitable M2.5 screws and the mounting holes in
the base body of the P-725 (see Figure 3 above).