Housing / tip material: Stainless steel.
Vacuum versions to 10
-6
hPa are available under the order number P-843.x0V.
All specifications based on room temperature (22 °C ±3 °C).
Specifications for vacuum versions can differ.
12.2
Maximum Ratings
P-843 piezo actuators are designed for the operating data specified in the table below.
Additional information on the maximum ratings table
■
Maximum operating frequency without load, without considering thermal aspects,
column A:
The value corresponds to one third of the resonant frequency of the unloaded piezo
actuator. For further restrictions, see
"Overview of Limiting Factors" (p. 18)
■
Maximum operating frequency without load, considering thermal aspects, column B:
In order to prevent the maximum permissible operating temperature from being
exceeded, the operating frequency of the unloaded, uncooled piezo actuator must not
exceed the specified frequency when the operating voltage is 100 V peak-to-peak. In the
case of smaller amplitudes of the operating voltage and/or the use of cooling measures,
higher operating frequencies are possible. For further restrictions, see
■
Maximum power consumption:
The value corresponds to the power consumption of the unloaded, uncooled piezo
actuator that is operated at a voltage of 100 V peak-to-peak with the operating frequency
from column B of this table.
Piezo actua-
tor*
Maximum
operating
voltage
range
Maximum operating frequency
without load
Maximum pow-
er consumption
A:
Without consid-
ering thermal
aspects
B:
Considering
thermal aspects
Considering
thermal aspects
P-84x.10
0 to 100 V
6000 Hz
158 Hz
4.3 W
P-84x.20
0 to 100 V
4667 Hz
151 Hz
8.6 W
P-84x.30
0 to 100 V
3333 Hz
143 Hz
13 W
P-84x.40
0 to 100 V
2833 Hz
136 Hz
17.2 W
P-84x.60
0 to 100 V
2000 Hz
129 Hz
25.8 W
* The letter x in the product number of the piezo actuator stands for "2" or "3".
12.3
Ambient Conditions and Classifications
The following ambient conditions and classifications for the P-843 must be observed:
12 TECHNICAL DATA
P843M0001EN
‒
2/23/2021
29
M O T I O N | P O S I T I O N I N G