PI M-403 2S Series, Руководство пользователя

Страница: 8 / 40

Introduction
The verification of the technical specifications by the manufacturer does not
imply the validation of complete applications. In fact the operator is
responsible for the process validation and the appropriate releases.
The M-403 meets the specifications as defined by DIN EN 61010 for safe
operation under normal ambient conditions. See the specifications table for
details.
1.3 Safety Instructions
!
CAUTION
Read this before operating the equipment covered in this manual.
Always keep the User Manual safe and close to the described device. In
case of loss or damage to the instructions, please order a new copy from
your PI distributor or download one from www.pi.ws (http://www.pi.ws).
Also keep and add all further information (e.g. extended instructions or
Technical Notes) to the User Manual.
Read carefully the User Manuals of all other components involved such as
controllers or software.
Read the following before operating the equipment covered in this manual:
WARNING—CRUSH HAZARD
Never put anything where the moving platform or any connected object
could possibly trap it! The moving platform can accelerate rapidly and
generate high forces which can cause damage or injury.
!
CAUTION
Be aware that the stage could start an unexpected move when first
connected to the motor controller.
Be aware that failure of the motor controller may crash the stage against
a hard stop.
Crashes can cause irreparable damage. Do not disable limit switches in
software. Test limit switch operation at low speeds. Stop system if
necessary. Do not let it run against a hard stop.
www.pi.ws M-403 MP 73E Release 2.0.1 Page 5