PI M-232.17, Руководство пользователя, Страница: 8 / 51

2 Safety
4 Version: 1.2 MP105E M-232 Linear Actuator

If you pass the M-232 on to other users, also turn over this user manual as
well as all other relevant information provided by the manufacturer.

Only use the device on the basis of the complete user manual. Missing
information due to an incomplete user manual can lead to slight injury as well
as property damage.

Only install and operate the M-232 after having read and understood this user
manual.
Personnel qualification
The M-232 may only be started up, operated, maintained and cleaned by authorized
and qualified staff.
2.2.2 Safety Measures during Installation
A cable break leads to a failure of the linear actuator.

Install the linear actuator so that the cable is not bent or squeezed too
severely during operation.
Lateral forces that affect the pusher of the linear actuator increase the friction on the
internal drive components. Increased friction impairs the motion of the pusher and
increases wear on the drive components.

Avoid lateral forces on the pusher of the M-232.
Overtightening the mounting screws can damage the mounting shaft of the linear
actuator and hinder the motion of the pusher. This reduces the positioning accuracy.

Tighten the mounting screws to a maximum torque of 0.3 Nm.
The heat produced during operation of the M-232 can affect your application.

Install the M-232 so that your application is not affected by the dissipating
heat.