PI M-227 Series Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 26

PI M-227 Series Скачать руководство пользователя страница 16

User Manual

MP40E, version 1.2.0, valid for M-227.10, M-227.25, M-227.50

CBo, 5/20/2019

Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany

Page 16 / 26

Phone +49 721 4846-0, Fax +49 721 4846-1019, Email

[email protected]

Starting and Operating the M-227

Requirements



You have read and understood the safety precautions (p. 7).



You have read and understood the general notes on startup and operation (p. 14).



You have read and understood the user manual for the electronics (p. 10).



You have read and understood the user manual for the PC software.



You have installed (p. 12) the M-227 correctly.



The electronics and the required PC software were installed. All connections to the

electronics were made (see user manual for the electronics).

Starting and operating the M-227



Follow the instructions in the user manual for the electronics (p. 10) used for startup

and operation of the M-227.

Maintenance

NOTICE

Damage due to improper maintenance!

The M-227 can become misaligned as a result of improper maintenance.



Loosen any screws only when instructed in this user manual.

INFORMATION

Frequent motion over a limited travel range can cause the lubricant to be distributed unevenly

on the drive screw.



Perform a maintenance run over the entire travel range at regular intervals (see user

manual for the controller). The more motion is done over a limited travel range, the

shorter the time must be between the maintenance runs.

Cleaning the M-227

Requirements



You have disconnected the M-227 from the electronics.

Cleaning the M-227



Clean the surfaces of the M-227 with a cloth that is dampened with a mild cleanser or

disinfectant (e.g., isopropyl alcohol).

«
...
14
15
16
17
18
...
»

Содержание M-227 Series



























Отзывы:

Нет отзывов