PI M-227 Series Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 26

PI M-227 Series Скачать руководство пользователя страница 14

User Manual

MP40E, version 1.2.0, valid for M-227.10, M-227.25, M-227.50

CBo, 5/20/2019

Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany

Page 14 / 26

Phone +49 721 4846-0, Fax +49 721 4846-1019, Email

[email protected]

Connecting the M-227 to the electronics



Connect the M-227, the motor cable and the electronics as shown in the connection

diagram below.

−

Pay attention to the assignment that is given by the labeling on the sockets,

connectors and cables.

Figure 4: Connection of the M-227 to the electronics

Startup and Operation

General Notes on Startup and Operation

CAUTION

Risk of crushing!

Risk of minor injuries or damage to equipment from crushing between the pusher and a fixed

part or obstacle.



Use protective structures to keep limbs away from areas in which they could be seized by

moving parts.



Maintain safety distances according to DIN EN ISO 13857.



Mount the M-227 so that the motion of the pusher is not hindered by objects in the

workspace.

NOTICE

Collision with the hard stop or an obstacle!

Collision with the hard stop or an obstacle leads to damage or considerable wear on the

M-227.



Do

not

place any objects in areas where they can get caught by moving parts.



If the pusher or the load mounted on it collides with an obstacle, switch off the motor.



Only command target positions that are located within the travel range.



Use external limit switches to avoid collisions.



Stop the motion immediately if a controller malfunction occurs.



Ensure that the M-227 does neither abruptly stop at the end of the travel range nor

attempt to continue moving.



Ensure that the end of the travel range is approached at low velocity.



Determine the maximum velocity for your application.

«
...
12
13
14
15
16
...
»

Содержание M-227 Series



























Отзывы:

Нет отзывов