PI L-306 Series, Руководство пользователя

Страница: 10 / 25

User Manual
L306T0002, applies to L-306.011100 / 011112 / 013112
MMa, 2019-AUG-20
PI miCos GmbH, Freiburger Strasse 30, 79427 Eschbach, Germany Page 10 / 25
Phone +49 7634 5057-0, Fax +49 7634 5057-99, Email info@pimicos.ws , www.pi.ws
Connecting the Positioner to the Protective Earth Conductor
INFORMATION
It is only necessary to connect the positioner to the protective earth conductor when both of
the following conditions are met:
 The load on the platform of the positioner must be connected to the protective earth
conductor, but it is not possible to connect the protective earth conductor directly to the
load.
 The load and the platform are connected conductively to each other.
INFORMATION

Observe the applicable standards for connecting the protective earth conductor.
An M4 hole for the protective earth conductor connection is marked on the corresponding side
of the positioner.
Figure 4: Components / mounting of the protective earth connector
1 Base body of the positioner
2 Flat washer
3 Safety washer
4 Screw
5 Cable lug
6 Protective earth conductor
Requirements

You have read and understood the general notes on installation (p. 7).