Start-Up
www.pi.ws
E-462 PZ210E Release 1.1.0
Page 11
Connect pin 3 or 5 to a protective earth conductor.
Pin
Function
1
Supply Power (GND)
2
Supply Power 12 V DC ±10 %
3
GND
4
Output reference v5 V
5
GND
6
Input control voltage, 0 to 5 V
Figure 2: E-462.OE1, top view, shown wired for manual operation with an external
potentiometer using the on-board 5 V DC reference voltage.
2.2.2
Dimensions
Figure 3: E-462.OE1, bottom view, dimensions in millimeters
2.2.3
Control Signal
Output voltage is controlled by an analog signal in the 0 to 5 V range. The
signal can be generated with one of the following options:
