Start-Up
www.pi.ws
E-462 PZ210E Release 1.1.0
Page 10
2.2
E-462.OE1
DANGER—HIGH VOLTAGE
E-462 Power Amplifiers output VERY HIGH VOLTAGES and HIGH
CURRENTS which can cause death or injury!
Take special care if connecting products from other manufactures.
Follow general accident prevention rules!
Working with these devices requires adequately trained and educated
operating personnel.
During operation, do NOT touch any part which might be connected to
the HV output!
Make sure that your actuator and pin 3 or 5 of the E-462.OE1 are
connected to a protective earth conductor.
Figure 1: E-462.OE1 OEM module has HV cable on top and pins on the
bottom (not shown) for PCB mounting
2.2.1
Connections
Observe the safety precautions (p. 3) when handling the E-462.OE1!
The piezo voltage output is on a short cable on the top side. The connector
is the standard LEMO socket PI uses for high-voltage piezo actuators (see
“Connectors” p. 16). With the unit powered down, connect the piezo
actuator to the LEMO socket.
The E-462.OE1 module is designed for PCB mounting. All connections
except for the piezo voltage output are made via the pins on the bottom
side.
