1 About this Document
2
Version: 1.6
MP141E
L-509 Linear Stage
Symbol/
Label
Meaning
1.
2.
Action consisting of several steps whose sequential order must be
observed
Action consisting of one or several steps whose sequential order is
irrelevant
Lists
p. 5
Cross-reference to page 5
RS-232
Labeling of an operating element on the product (example: socket of
the RS-232 interface)
Warning sign affixed to the product that refers to detailed information
in this manual.
1.3
Definition of Terms
Term
Explanation
Load capacity
Maximum load capacity in the vertical direction when the stage is
mounted horizontally. The contact point of the load is in the center of
the platform.
Max. push/pull force
Maximum force in the direction of motion. Some stages may have
higher forces but with limited lifetimes. In the case of vertical
mounting, the specified value (see 45) for models without a gearhead
and brake only applies when the servo mode is on.
Linear encoder
The linear encoder is an incremental sensor for capturing changes in
position. Signals from the sensor are used for axis position feedback.
After the controller is switched on, a reference point definition must
be performed before absolute target positions can be commanded
and reached.
1.4
Pictures
For better understandability, the colors, proportions and degree of detail in illustrations can
deviate from the actual circumstances. Photographic illustrations may also differ and must not
be seen as guaranteed properties.