PI2Media PI2AES
Hardware Reference Manual – P0.1 - 3/27/2019
PAGE 16
Figure 5 – PI2AES Side View (shown mounted on Raspberry Pi)
8.2
J1 – DC JACK
This jack is designed to accept a 5.5mm x 2.5mm center positive plug for external
power in. Voltage must be +12V to +48V.
8.3
P1 – 40-PIN GPIO HEADER
This is a standard 40-Pin .1” Dual Row Female Header. It is designed to accept a
Raspberry Pi single board and conforms to the standard Raspberry Pi 40-Pin GPIO
Header pinout.
8.4
P2 - I2S EXPANSION HEADER
This is a 16-Pin, .1” Single Row Header that carries I2S, I2C, and Power for expansion
use. The Pinout for P2 is shown in the following table.
P2 PIN
Name
Description
1
5V
+5V direct from Regulator
2
5V
+5V direct from Regulator
3
GND
Ground
P1 – I2S
HDMI
J1 – DC
JACK
