Phytec phyFLEX-i.MX 6, Быстрый старт

Страница: 81 / 85

Quickstart Instructions

Click on Apply and close the window with OK .
Now all configurations are done and you can use this Kit to cross compile your application
also if you generate a new project.
6.1.7 Setting up a TFTP server
In the chapter "Installation of software packages" you have installed the required
packages to set up a TFTP server. Now we have to change some short settings.

First change the file /etc/default/tftp-hpa as follows:
TFTP_USERNAME="tftp"
TFTP_DIRECTORY="/tftpboot"
TFTP_ADDRESS="0.0.0.0:69"
TFTP_OPTIONS=" ‐‐ secure"

Then create a folder called /tftpboot . The TFTP server will access this folder later.
mkdir /tftpboot

Finally we have to set the right permissions:
chmod 777 /tftpboot

PHYTEC Messtechnik GmbH 2015 L-781e_7
75