Phytec phyFLEX-i.MX 6, Быстрый старт

Страница: 71 / 85

Quickstart Instructions

PHYTEC Messtechnik GmbH 2015 L-781e_7
65
6.1.3 Set the Git Configuration
The Board Support Package is heavily based on Git . Git needs some information from you as
a user to be able to identify which changes were done by whom. So at least set the name
and email in your git configuration, otherwise building the BSP generates many warnings.

Enter following two commands to directly set them
git config ‐‐ global user.email “your_email@example.com”
git config ‐‐ global user.name “name surname”
6.1.4 Build the Board Support Package and Install the SDK
In this chapter we build our Board Support Package with the help of the Yocto Project .
First we create a folder for the BSP in our example we use the path as it is in our virtual
machine

Enter the following commands:
sudo mkdir ‐ p /opt/PHYTEC_BSPs/phyFLEX ‐ i.MX6/
sudo chmod ‐ R 777 /opt/PHYTEC_BSPs/
cd /opt/PHYTEC_BSPs/phyFLEX ‐ i.MX6/

Download the phyLinux script and set execution privileges:
wget ftp://ftp.phytec.de/pub/Software/Linux/Yocto/Tools/phyLinux
chmod +x ./phyLinux
The phyLinux script is a basic management tool for PHYTEC Yocto BSP releases. It is mainly a
tool to get started with the BSP structure. You can get all the BSP sources without the need
of interacting with repo or git.

Start the phyLinux script
./phyLinux init
During the execution of the init command, you need to choose your processor platform
(iMX6), PHYTEC's BSP release number (PD15.1.1) and the hardware you are working on
(phyflex-imx6-2 ).
After you downloaded all the meta data with
phyLinux , you have to set up the shell
environment variables. This needs to be done every time you open a new shell for starting
builds. We use the shell script provided by poky in its default configuration.

Type:
source sources/poky/oe ‐ init ‐ build ‐ env