Phytec phyCORE-TriCore, Руководство по оборудованию

Страница: 13 / 53

phyCORE-TriCore Development Board
1.2.2 Jumpers on the phyCORE-TriCORE Development Board
Peripheral components of the phyCORE-TriCORE Development
Board can be connected to the signals of the phyCORE-TC1130 or
phyCORE-TC1796 by setting the applicable jumpers.
The Development Board’s peripheral components are configured for
use with the phyCORE-TC1130 or phyCORE-TC1796 by means of
insertable jumpers. If no jumpers are set, no signals connect to the
DB-9 connectors, the control and display units and the CAN
transceivers.
Figure 3 illustrates the numbering of the jumper pads,
while
Figure 4 indicates the location of the jumpers on the Development
Board.
©
PHYTEC Meßtechnik GmbH 2009 L-730e_0
7
Figure 3: Numbering of Jumper Pads
Figure 4: Location of the Jumpers (View of the Component Side)
z.B.: JP28
z.B.: JP23 z.B.: JP24