Phytec phyBoard Wega AM335x, Инструкция по применению

Страница: 67 / 130

Accessing the phyBOARD-Wega Interfaces
©
PHYTEC Messtechnik GmbH 2014 L-792e_1
51
3 Accessing the phyBOARD-Wega Features
PHYTEC phyBOARD-Wega is fully equipped with all mechanical and electrical components
necessary for the speedy and secure start-up.
3.1 Overview of the phyBOARD-Wega Peripherals
The phyBOARD-Wega is depicted in Figure 2 . It features many different interfaces and is
equipped with the components as listed in Table 2 , and Table 3 . For a more detailed
description of each peripheral refer to the appropriate chapter listed in the applicable
table.
Figure 2 highlights the location of each peripheral for easy identification.
3.1.1 Connectors and Pin Header
Table 2 lists all available connectors on the phyBOARD-Wega . Figure 2 highlights the
location of each connector for easy identification.
Reference
Designator
Description
See
Section
X11 Secure Digital / Multi Media Card (Micro-slot) 3.2.7
X15 USB host connector (USB 2.0 Standard-A) 3.2.4
X16 Ethernet 0 connector (RJ45 with speed and link LED)
X17 Ethernet 1 connector (RJ45 with speed and link LED)
3.2.3
X42 USB On-The-Go connector (USB Micro-AB)
3.2.4
X55 Mono Speaker output (2-pole Molex SPOX 2.5 mm pitch)
3.2.5
X65 CAN connector (2×5 pin header 2.54 mm pitch)
3.2.6
X66
RS-232 with RTS and CTS (UART1; 2×5 pin header 2.54 mm
pitch)
3.2.2
X67
Power supply 5 V only (via 6-pole WAGO male header, or 2-
pole PHOENIX MINI COMBICON base strip)
3.2.1.1
X69 Expansion connector (2×30 socket connector 2 mm pitch) 3.2.11
X70 A/V connector #1 (2×20 socket connector 2 mm pitch)
X71 A/V connector #2 (2×8 socket connector 2 mm pitch)
3.2.8
X72 Optional 5 V power supply via USB Micro-AB connector
3.2.1.1
X73
Stereo Line Out and Line In connector
(2×3 pin header 2.54 mm pitch)
3.2.5
Table 2: phyBOARD-Wega Connectors and Pin Headers