L-843e.A1 phyBOARD-Mira i.MX 6 Hardware Manual
© PHYTEC Messtecknik GmbH
6
1.
2.
as the basis for Rapid Development Kits which serve as a reference and evaluation platform
as insert-ready, fully functional OEM modules, which can be embedded directly into the user’s peripheral
hardware design.
Take advantage of PHYTEC products to shorten time-to-market, reduce development costs, and avoid substantial
design issues and risks. With this new innovative full system solution, you will be able to bring your new ideas to
market in the most timely and cost-efficient manner.
For more information go to:
http://www.phytec.de/support/ueberblick/
or
http://www.phytec.eu/support/ueberblick/
1.10 Declaration of Electro Magnetic Conformity of the PHYTEC
phyCORE
®
‑
Mira i.MX 6
PHYTEC System on Module (henceforth products) are designed for installation in electrical appliances or as
dedicated Evaluation Boards (i.e.: for use as a test and prototype platform for hardware/software development) in
laboratory environments.
PHYTEC products fulfill the norms of the European Union’s Directive for Electro Magnetic Conformity in accordance
with the descriptions and rules of usage indicated in this hardware manual (particularly with respect to the pin
header row connectors, power connector, and serial interface to a host-PC).
1.11 Product Change Management and Information Regarding Parts
Populated on the SOM / SBC
With the purchase of a PHYTEC SOM / SBC, you will, in addition to our hardware and software possibilities, receive
free obsolescence maintenance service for the hardware we provide. Our PCM (Product Change Management) team
of developers is continuously processing all incoming PCNs (Product Change Notifications) from vendors and
distributors concerning parts that are used in our products. Possible impacts on the functionality of our products
Warning
PHYTEC products lacking protective enclosures are subject to damage by ESD and, therefore, must be
unpacked, handled, or operated in environments in which sufficient precautionary measures have been
taken with respect to ESD dangers. Only appropriately trained personnel such as qualified electricians,
technicians, and engineers should handle and/or operate these products. Moreover, PHYTEC products
should not be operated without protection circuitry if connections to the product's pin header rows are
longer than 3 m.
Tip
Implementation of PHYTEC products into target devices, as well as user modifications and extensions of
PHYTEC products, is subject to renewed establishment of conformity to and certification of Electro
Magnetic Directives. Users should ensure conformity following any modifications to a product as well as
the implementation of a product into target systems.
