Phytec L-1014e.A4 phyBOARD-Mira, Быстрый старт

Страница: 10 / 22

L-1014e.A4 phyBOARD-Mira Voice Control Kit with Beamforming Quickstart Guide
2 Voice Control Module Descriptions
Jumper Setting Description
JP1 1+2 Uses 7 microphones on the Microphone Array Set
(PCM-940)
2+3 Uses 2 microphones on the Voice Recognition Adapter
(PEB-AV-07)
JP2 1+2 TXD signal is available on Microphone Array Connector
(X75)
2+3 TXD is connected to Audio Codec
Display
There are two options to connect a display to your kit.
HDMI
An HDMI display can be connected via the HDMI connector (X28) on the phyBOARD-Mira. HDMI is the default display
output. This requires an HDMI display and cable.
PHYTEC Upgrade Kit 7" Capacitive Display
The PHYTEC upgrade kit, KPEB-AV-07-070.Ax for the phyBOARD-Mira, is a 7" capacitive display that can be used
instead of an HDMI display. Contact PHYTEC for further information. For more information, please read
Connecting
the Capacitive 7'' EDT Display to Voice Recognition Kit (LAN-078e_1) .
Audio Input and Output
The input is done by means of the Microphone Array which has 7 microphones mounted over it.
The output is only supported via the USB port. The audio jack of the Voice Recognition Adapter (PEB-AV-07) is not
supported for an output device.
Warning
A display is required for the two demo programs to work.

Tip
For more information on setting the Audio input and output, please read vicCONTROL industrial version
5.0.0 User guide Phytec Voice Control Kits (phyBOARD®-Mira) Section 4.9 . The link can be found in the
section Further Documentation .
