Phytec L-1008e.A0 phyCORE-i.MX 8M Plus Alpha Kit, Быстрый старт

Страница: 9 / 40

PHYTEC
Page 9
host$ source sources/poky/oe-init-build-env
Now you should be in a sub-folder named 'build' and you can start the first build process:
host:~/yocto/build$ bitbake phytec-qt5demo-image
BSP Images
All images generated by are deployed to . Bitbake ~/yocto/build/deploy/images/phyboard-pollux-imx8mp-1/
The following list shows for example all files generated for the i.MX 8M Plus machine: phyboard-pollux-imx8mp-1
U-Boot: u-boot.bin
U-Boot-SPL: u-boot-spl.bin
imx-boot: imx-boot
lpddr4_pmu_train_1d_dmem_201904.bin, lpddr4_pmu_train_1d_imem_201904.bin, lpddr4_pmu_train_2d_dmem_201904. lpddr4 binary files:
bin, lpddr4_pmu_train_2d_imem_201904.bin
Image Kernel:
Kernel device tree file: oftree
phytec-qt5demo-image-phyboard-pollux-imx8mp-1.tar.gz, phytec-qt5demo-image-phyboard-pollux-imx8mp-1.manifest Root filesystem:
SD card image: phytec-qt5demo-image-phyboard-pollux-imx8mp-1.sdcard
System Booting
The default boot source for the i.MX 8M Plus module phyBOARD-Pollux is eMMC. But for the , the BSP is available on SD-Card. To update alpha release
. the software on eMMC, see Updating Software
Booting from eMMC
To boot from eMMC, make sure that the BSP image is flashed correctly to the flash. On DIP switch S1, all positions need to be set to off.
The following boot sequence can be seen:
Tip
The default Linux image will start a Wayland Weston, even if there is no display connected. phytec-qt5demo-image