Physipro ELBOW STOPS Скачать руководство пользователя страница 6

MAINTENANCE 

Regular cleaning eliminates the accumulation of dirt and grime and helps extend 
the life of your upper limb support. It is recommended to visually inspect all the 
components of the upper limb support during the cleaning process. 

A weekly cleaning is recommended. 

Cleaning the elbow and lateral stops  

1. Remove the neoprene cover from the rigid structure.
2. Wash the neoprene cover with a mild soap or neutral detergent and rinse

thoroughly. Let the cover air dry completely.

3. With a dry cloth, dust off the rigid structure surface before cleaning.
4. Gently wipe the rigid structure with a cloth dampened with a mild soap or

neutral detergent and dry-off with a clean cloth.

5. Remove all debris on the padding surface.
6. With a mix of water and a soft soap or neutral detergent, gently wipe clean

the padding.

7. Remove excess moisture by lightly patting the surfaces with a clean cloth and

then let air dry completely.

8. Once all components are completely dry, reinstall the neoprene cover.

WARNINGS

 

 

Do not submerge the foam padding in water.

 

Never machine wash or dry.

Elbow and lateral stops 

Storage

 

Upper limb 

supports must be stored in a dry and secure area. 

WARNINGS 

Never store your 

upper limb support 

in direct sunlight, near a heat

source or in a high-humidity environment.

Never place your 

upper limb support 

near sharp objects or in an

area where it may be struck by an object.

6

Life span

The estimated life span of 

ZPVSVQQFSMJNCTVQQPSUJTPOF ZFBS

 

Disposal of Medical Devices  

Do not burn or throw away medical devices outside of designated areas.

 

Содержание ELBOW STOPS

















Отзывы: