Physipro ELBOW STOPS, Руководство пользователя

Страница: 5 / 16

INSTALLATION
Elbow stops can be installed on top or underneath the tray. Refer to
the installation instructions required for the selected method of
installation. The lateral stop can be installed on top of the wheelchair tray only.
Required tool: 3mm Allen key
Installing the elbow stop on top of the tray
1. Determine the desired position of the elbow
stop and then mark the location of the brass
barbed inserts on the tray.
2. Drill two ¼” holes in the tray.
3. Insert the brass barbed inserts.
4. Align the elbow stop bracket with the inserts.
5. Insert the button head screws
A
with washer.
6. Move the elbow stop along the
adjustment slots until the desired position
is obtained.
7. Firmly tighten screws A with a 3mm Allen key.
Installing the elbow stop underneath the tray
1. Determine the desired position of the elbow
tray and then mark the location of the screws on
the tray.
2. Drill two ¼” holes in the tray.
3. Place the elbow stop bracket
underneath the tray and align the bracket
with the holes.
4. Insert the flat head screws B .
5. Move the elbow stop along the
adjustment slots until the desired position
is obtained.
6. Fasten the screws
B
with washers and flange
nuts, with a 3mm Allen key.
Owner’s manual
A
B
A
Installing the lateral stop
1. Determine the desired position of the lateral stop
and then mark the location of the brass barbed
inserts on the tray.
2. Drill two ¼” holes in the tray.
3. Insert the brass barbed inserts.
4. Align the elbow lateral bracket with the inserts.
5. Insert the button head screws
C
with washer.
6. Move the lateral stop along the
adjustment slots until the desired position is
obtained.
7. Firmly tighten screws
C
with a 3mm Allen key.
C
5
September 20 22