Title
LPCR2 Service Process Work Instruction
Page
2 of 23
Doc Type
Service Process Document
Doc ID
3323299
Doc Rev
C
Doc State
Released
State Date
2/26/2020
Ref. Product DMR
:
Ref. PFMEA:
Ref. PFMEA Rev:
Template: 7000743_B
Purpose:
This Service Process Work Instruction defines the steps to troubleshoot and repair the LIFEPAK CR2 defibrillator.
Scope:
This document applies to Service technicians, trained to this Process Work Instruction, and the processes performed in preparing devices for use. The
procedures set forth in this document were derived from manufacturing process documents. This document is limited to LIFEPAK CR2 devices. All
other devices are outside the scope of this process work instruction.
Related Documents:
Document No.
Title
3321515
Instructions, Operating, LIFEPAK CR2
3322174
Guide, Wireless Setup, LIFELINK, LIFEPAK CR2
3323342
Test Procedure, Manual PIP, LPCR2
Service Personnel Qualifications
These instructions are intended for authorized Service Representatives and Service Providers who have been trained to the Service procedure and
who are familiar with the LIFEPAK CR2 defibrillator.
Preface:
This Service Process Work Instruction describes how to support the following tasks for the LIFEPAK CR2 defibrillator:
•
Replacement Procedures
•
Troubleshooting common issues
•
Preventative Maintenance
Another publication, the LIFEPAK CR2 Defibrillator Operating Instructions (CAT 26500-003800 for cprINSIGHT and CAT 26500-003754 for no
cprINSIGHT), is for use by physicians, clinicians, and emergency care providers. The operating instructions provide step-by step instructions for use,
as well as operator-level testing and maintenance.